Background Image
  • Image
  • Image
  • Image


The iGS-110s is the ideal controller to manage both temperature and humidity at the same time. With day/night detection and its different operating modes, you will manage your climate in any way you wish. The controller comes with an external probe with a 10 feet (3 m) cable to place the sensors directly on your plants. The iGS-110s is a smart device that provides you with information on the performance of your equipment allowing you to optimize your configuration.

  • Description

    Control Module
    The controller has two separate auxiliary outputs for equipment correcting the temperature and relative humidity. The output controlling the temperature allows cooling, heating, or cooling and dehumidifying. The output for relative humidity helps to humidify or dehumidify. The controller will automatically adjust its operating differential to keep conditions closest to temperature or relative humidity set points.
    • Temperature precise sensor: ±1.8°F (±1°C)
    • Adjustable separate set points for day and night
    • Relative humidity precise sensor: ±3.5% RH
    • Adjustable operation priority and shutoff additional delay

    Strategies to Garden without CO2 Enrichment
    The two auxiliary outputs can be configured independently according to the temperature or humidity control mode For example, with cooler and dryer air outside, the fresh air intake and CO2, cooling and dehumidification can be provided by ventilation controlled by the 1st output, while the 2th output can control heating or humidification.

    Control Temperature or Humidity with Highest Priority and CO2 Enrichment
    Plug a power strip in an auxiliary outlet of the temperature and humidity controller (iGS-110) and plug the temperature or humidity prioritized equipment and the iLS120-OFF sense cord. Feed the iLS120-OFF in different circuit and plug in a CO2 controller (iGS-061 or iGS-100) to manage CO2 enrichment equipment.
    • 1 auxiliary outlet for temperature control
    • 1 auxiliary outlet for RH control

    To increase your cooling/heating and humidifying/dehumidifying capacity, plug an iLS120-ON to auxiliary outlets to control additional equipment on different circuit (adds 15 A, 120 V), or a load switcher box iLS4-121, iLS4-121s or iLS4-241 to control up to 8000 W of equipment (4 outlets up to 15 A, 120 V or 240 V). It can also control large capacity air conditioning unit through an iGS-DCS relay (other voltage then 110-120 V).
    • One IGS-25 power boxes (2 outputs)
    • 120 V, 15 A, 2 HP load capacity

  • Specifications
    Controller Functions
    Integrated Controller Yes
    Digital Display Yes
    Info, Error or Alarm Messages Yes
    Day/Night Detection Photocell
    Day and Nigth Setpoints Yes
    Adjustable Operation Priority Yes
    Performance Analysis Temperature or RH Control
    Self Audit of Controller Errors Yes
    Data Log Last 24 hours
    Integrated Fan for Air Sampling Magnetic levitation sleeve bearing, 7 cfm
    External Probe 10 feet (3 m) cable
    Auxiliary Devices Control
    Controlled Actions Heating or Cooling, and Humidifying or Dehumidifying
    Controlled Auxiliary Outputs iGS-25 (2 auxiliary outlets)
    Simultaneously Controlled Equipment 2 (temperature and RH control)
    Time Control
    Adjustable Restart Delay Yes
    Temperature Control
    Temperature Display Yes
    Temperature Sensor Accuracy ±1.8°F (±1°C)
    Temperature Sensor Range -4 °F to +122 (-20 °C to +50 °C)
    Adjustable Temperature Setpoint Yes
    Temperature Differential Fixed or dynamic
    Adjustable Temperature Differential Yes
    Controlled Equipment for Temperature Heater or Air Conditionner or Fans
    Humidity Control
    RH Display Yes
    RH Sensor accuracy ± 3,5 % RH
    RH Sensor Range 0 to 100 % RH
    Adjustable RH Setpoint Yes
    RH Differential Fixed or dynamic
    Adjustable RH Differential Yes
    Controlled Equipment for RH Humidifier or Dehumidifier or Fans
    Electrical Specification
    Power Supply 15 VDC 400 mA
    Auxiliary Power Supply 120 V – 60 Hz – 15 A (iGS-25 power box)
    Output Maximum Current 120 V, 15 A, 2 HP
    AC Adapter Power Supply 2V DC center positive 800 mA min
    Splash Proof Membrane Front panel
    Operating Conditions 0 to 60 °C, 0 to 95 % non-condensing RH
    Warranty 3 years
    Technical Support Free support from 12 PM to 9 PM Monday to Friday, Eastern Time
    Country of Origin Canada