Background Image
  • Image
  • Image
  • Image
  • Image


The iG-100 is an easy to use CO2 enrichment or CO2 ventilation controller with day/night detection. The auxiliary output can shut-off or turn on another device (such as fan) while CO2 process is going on. The iGS- 100 is a smart device that analyzes your equipment performance and allows you to optimize your configuration to ensure higher growth rates.

  • Description

    Control Module
    The controller will automatically adjust its operating differential to keep conditions (CO2 concentration) closest to set points. Two set points are used: day and night set points. The air sampling is optimized by means of an integrated fan and the internal CO2 sensor reads values from 0 to 5000 ppm.
    • Displays both CO2 concentration and operating hints
    • Precise CO2 sensor: ±75 ppm
    • Adjustable set points for day and night from 0 to 4,900 ppm
    • Auxiliary output delay can be set (5 to 20 minutes)

    Control CO2 Enrichment with Highest Priority and Temperature or Humidity
    Plug a temperature or a humidity controller (iGS-021, iGS-110, or iGS-111) in the auxiliary output and you will be able to add CO2 in your grow room during the day (when there's light) and to control temperature or humidity day and night. The control unit can be positioned up to 6 feet from the output box (a cable up to 50 feet can be used).
    • 1 outlet controlling CO2 equipment
    • 1 auxiliary outlet for climate control

    The climate controllers can control large capacity air conditioning unit through an iGS-DCS relay (other voltage than 110-120 V). You can also increase your cooling, heating, humidifying and dehumidifying capacity by plugging to a climate controller's auxiliary outlet an iLS120-ON to control additional equipment on different circuit (adds 15 A, 120 V).
    • One IGS-25 power boxe (2 outputs)
    • 120 V, 15 A, 2 HP load capacity

  • Specifications
    Controller Functions
    Integrated ControllerNo
    Digital Display Yes
    Info, Error or Alarm Messages Yes
    Day/Night Detection Photocell
    Day and Nigth Setpoints Yes
    Integrated Fan for Air Sampling Magnetic levitation sleeve bearing, 7 cfm
    Auxiliary Devices Control
    Controlled Actions Increase or decrease CO2 concentration
    Controlled Auxiliary Outputs iGS-25 (2 auxiliary outlets)
    Simultaneously Controlled Equipment 2 (CO2 control and climate control)
    Time Control
    Adjustable Restart Delay 0 to 20 min
    CO² Control
    CO2 Concentration Display Yes
    CO2 Power Indicator Yes
    Dangerous CO2 Concentration Alert Yes
    CO2 Sensor Accuracy ± 75 ppm
    CO2 Sensor Range 0 to 5000 ppm
    Adjustable CO2 Concentration Setpoint 400 to 4900 ppm
    CO2 Concentration Differential Dynamic
    Altitude Correction Yes
    Controlled Equipment for CO2 CO2 tank or gas burner or fans, and a climate correcting device
    Electrical Specification
    Power Supply 15 VDC 400 mA
    Auxiliary Power Supply 120 V – 60 Hz – 15 A (iGS-25 power box)
    Output Maximum Current 120 V, 15 A, 2 HP
    AC Adapter Power Supply 2V DC center positive 800 mA min
    Splash Proof Membrane Front panel
    Operating Conditions 0 to 60 °C, 0 to 95 % non-condensing RH
    Warranty 3 years
    Technical Support Free support from 12 PM to 9 PM Monday to Friday, Eastern Time
    Country of Origin Canada